Esu ECoSBoost Manual de Instruções descarregar pdf (Página 6)

8. Power supply

8.1. Power supply

The ECoSBoost 4A gets its power via a 2.1mm DC-socket, the

ECoSBoost 8A via a 4-pin Mini-DIN socket. Basically all DC or AC

transformers can be used to power the ECoSBoost, provided they

generate sufﬁcient power. The secondary (supply) voltage corre-

sponds with the track voltage; voltage stabilising or adjustment

does not take place.

The ECoSBoost has its own internal protective circuitry for under-

voltage and overload (-current).

VIn:  14Vto19VACorDC

Input current: Max. 5A for 4A version,

Max. 10A for 8A version

•Thepeak voltageof the transformermay notexceed 20V in

open circuit operation. Otherwise the electronics of the ECoS-

Boost could be possibly destroyed.

•Please exclusively use the power supply provided with the

ECoSBoost or respectively any other power supply released by

ESU, for powering the ECoSBoost. The use of any other power

supply could lead to the destruction of the ECoSBoost. We will

not accept any warranty claims arising from the use of a diffe-

rent power supply!

8.2. Power supply unit

•Only use the power supply provided for ECoSBoost. Other

transformers may lead to reduced output or in extreme cases

to damage of the command station.

•Pleaseuse the powersupply providedwith ECoSBoostsolely

for powering ECoSBoost. Do not use it for other household

appliances.

•Check the power supply regularly for any visible damage of

the housing or the mains cable. Damaged parts may never be

used! Do not attempt to repair the power supply! Extreme

danger – risk of fatal injury!

•Makesurethereissufcientventilationaroundthepowersup-

ply. Mounting in furniture without air circulation may lead to

overheating of even ﬁre!

Depending on the version, a power supply with the following cha-

racteristics is delivered with the ECoSBoost:

8.2.1. 5A Power supply

VIn:  100V–240VAC,50/60Hz

Input current: 1.8A max.

VOut:  Adjustablefrom15V-21VDC,stabilised

Output current: 5A max.

Plug: DC plug, 2.1mm, 1.8m wire harness

a) Power-LED (red)

b) Output socket (low voltage)

c) Main socket

Wiring details

Figure 2

8.2.1.1. Setting the input voltage and output voltage

The power pack generates a stabilised voltage that serves to pow-

er your model train layout. The output voltage must be adjusted to

the appropriate value subject to the scale of your trains.

For this purpose there is a small, round opening at the front of

the power pack that allows you to set the voltage with the aid of

a screw driver:

Lefthandlimit: ca.14.5V

Righthandlimit: ca.21.5V

8.2.1.2. Practical voltage settings

We recommend the following settings for the different scales:

•Ngauge:  15V-16V

•H0DC(DCC): 16V-18V

•H0three-rail-system: 18V-20V

•1gauge:  18V-21V

•Ggauge:  20V-21V

Figure 3

14V

21V

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentários a estes Manuais

Sem comentários

Esu ECoSBoost Manual de Instruções Página 6

Comentários a estes Manuais